Introduction
1: Support pulse (5V or 24V pulse signal), analog quantity (0-10V), modbus RS485 control
2: Supports CNC and PLC systems
3: To connect to a 24V pulse signal, two 2K 1/4W resistors need to be connected in series for P+and D+, otherwise the driver will burn out
4: The motor with brakes needs to be connected to a 24V external power supply and relay
5: Power on settings
Change P-036 to 1 (opposite direction) 0 (positive direction) motor direction conversion parameter
Change P-098 to 1 (internal enable) 0 (external enable)
The larger the parameter of P-029 electronic gear ratio, the faster the speed
Long press the confirm button on E-SEF to display DONE saved successfully. After setting all parameters, power off and restart.
Packing list
1 pcs 1.8kw 110ST-M06030 servo motor
1 pcs T3DF-L20 driver
1 pcs 3M encoder cable
1 pcs 3M motor cable
1 pcs 1M control cable
1 pcs RS485 cable
2 pcs 2个2K 1/4W resistors
manual sent via email or Scan QR code
English
Chinese (Simplified)
French
German
Japanese
Korean
Russian
Spanish
Turkish